起重电磁铁厂家
您当前的位置 : 首 页 > 产品中心 > 起重电磁铁
起重电磁铁

起重电磁铁

  • 所属分类:起重电磁铁
  • 浏览次数:
  • 发布日期:2019-12-13
  • 产品概述
  • 性能特点
  • 技术参数

起重电磁铁用 途Applications:  

  1、用于冶金、矿山、机械、交通运输等行业吊运钢铁等导磁性材料。  

  2、用作电磁机械手,夹持钢铁等导磁性材料。  

  1.Applied to lifting and transporting magnet -conductive materials such as steels and irons in metallurgy industry,mine industry,machinery industry,and elc.  

  2.Used as electromagnetic manipulator to hold magnet –conductive materials as steels and irons.  

起重电磁铁

起重电磁铁

主要特点Main Features:  

  1、采用全密封结构,防潮性能好。  

  2、经计算机优化设计,结构合理、自重轻、吸力大、能耗低。  

  3、励磁线圈经特殊工艺处理,提高了线圈的电气和机械性能,绝缘材料耐热等级达到C级,使用寿命长。  

  4、针对不同的被吸物状况采用不同的结构和参数,能广泛满足用户需求。  

  5、超高温型电磁铁采用独特隔热方式,其被吸物温度由过去的600℃提高到700℃,扩展了电磁铁的适用范围。  

  6、安装、运行、维护简便。  

  1.Rugged-all-welded construction with good moisture-proofing.  

  2.Mjorized design by computer with reasonable stucture,light dead  weight,strong attraction force and low energy consumption.

  3.The energizing coils are processed by special technology to improve  the electrical property and mechanical property of the energizing  coils.Heat-resistant grade of insulating material reaches Grade C  with long service life.  

  4.Various structures and technical data are available based on the attached items under different conditions to satisfy the wide demands from the clients.  

  5.Ultra-high temperature type electromagnet adopts unique method of heat-protection,the temperature of the attached materials is increased from 600℃ in the past to 700℃,which expands application range of the electromagnet.  

  6.Simple and convenient installation,operation and maintenance.  

选型注意事项Notes on Model Selection:  

  1、吸运物料温度低于100℃时,请选用常温型;超过100℃时,请选用高温型;超过600℃时,请选用超高温型。  

  2、通电持续率超过60%时,请选用高频型。  

  3、水中吸吊物料时,请选用潜水型(潜水深度≤100m)。潜水型电磁铁其参数与常温型相同,因此样本中未列出。如用户需潜水型,请在订货时说明。  

  4、周围环境温度:常温型-5℃~40℃,高温型-5℃~80℃。海拔高度不超过2000m。  

  5、设备配套:单台使用时,按消耗功率(电流)选择整流控制设备及辅助设备;多台联用时,按联用台数的消耗功率(电流)之和选择。  

  1.If temperature of the attached material is below 100℃,please choose nomal temperature type.lf it is above 100℃,please choose high temperature type.lf it is above 600℃,please choose ultra-high temperature type.

  2.When power-on sustaining rate is above 60%,please choose high freguency type.  

  3.When lifting and transporting materials are in water,please choose diving tope fdepth of diving s 100m).The technical data of diving type electromagnet is the same as that of normal temperature type,so it is not listed in cutalogue.lf customers ned diving type, please state clearly when ordering.  

  4.Environment temperature:normal temperature type-5℃~40℃,high temperature type-55℃~80℃.Height above sealevel is no more than 2,000m.  

  5.Corolary equipment:when using single unit,choose commutation control equipment and its neccessory equipment according to consumed power(current);when using combination of several units,choose it according to the sum of the consumed power (current)of the combined units.

标签

上一篇:起重电磁铁2019-12-23

最近浏览:

岳阳通力电磁设备有限公司

a1.png手机:18607302570 (唐先生)
a2.png手机:13973065184 (唐先生)
a3.png网址:www.yytldc.cn
a4.png地址:岳阳市岳阳楼区奇家岭办事处奇家社区廖家组004幢

起重电磁铁厂家

扫一扫,关注我们